|
Ideal use
cases
In-room hotel or
dormitory
deployments
IP-enabled devices
in the same room
Hardware
features
Integrated 4 port
gigabit switch 3
radios: 2.4 GHz, 5
GHz, and dual-band
WIDS/WIPS Integrated
Bluetooth BLE radio
2x2 MU-MIMO 802.11ac
Wave 2 Up to 1.3
Gbps aggregate
dual-band frame rate
802.3af PoE
compatible
Cloud
management
Network-wide
visibility and
control
Self-provisioning
for rapid deployment
Automatic reporting
Seamless firmware
updates
Enterprise security
802.1X
integration Air
Marshal: real-time
WIPS with forensics
Stateful Layer 3-7
firewall
Identity-based group
policies Built-in
antivirus scan (NAC)
Guest
access
1-click secure
guest access Guest
isolation firewall
Customizable splash
pages
RF
optimization
Dual-concurrent,
2-stream MIMO radios
Radios optimized for
rate-vs-range
performance Third
radio dedicated to
security and RF
management Built-in
real-time RF
spectrum view
Cloud-based
automatic RF
optimization
Layer 7
traffic shaping
Classify hundreds
of applications
Create
per-application
bandwidth limits
Prioritize
productivity apps
Restrict
recreational traffic
Location
Analytics
Measure visitor
capture rate, visit
length, and repeat
visit rate Measure
visitor trends over
time and compare
performance across
locations Enable
location services
through integrated
iBeacon
functionality
Radios
2.4 GHz
802.11b/g/n/ac
client access radio
5 GHz 802.11a/n/ac
client access radio
2.4 GHz & 5 GHz
WIDS/WIPS, spectrum
analysis, and
location analytics
radio 2.4 GHz
Bluetooth Low Energy
(BLE) radio with
beacon and BLE
scanning support
Concurrent
operations of all
four radios
Operating
Bands
2.412-2.484 GHz
5.150-5.250 GHz
(UNII-1) 5.250-5.350
GHZ (UNII-2)
5.470-5.600,
5.660-5.725 GHz
(UNII-2e) 5.725
-5.825 GHz (UNII-3)
802.11ac
& 802.11n
Capabilities
2x2 multiple
input, multiple
output (MIMO) with
two spatial streams
SU-MIMO and MU-MIMO
support Maximal
ratio combining
(MRC) & Beamforming
20 and 40 MHz
channels (802.11n),
20, 40, and 80 MHz
channels (802.11ac)
Up to 256 QAM on
both 2.4 GHz and 5
GHz bands Packet
aggregation
Power
Power over
Ethernet: 37 - 57
(802.3at compatible)
Power consumption:
25W max (802.3at)
802.3af operating
mode disables PoE
out Power over
Ethernet injector
sold separately
Mounting
Mounting hardware
included for US, UK,
EU, AU & Asia single
gang wall jacks
Physical
Security
Two security
screw options
(included) Concealed
mount plate
Environment
Operating
temperature: 32 °F
to 104 °F (0 °C to
40 °C) Humidity: 5
to 95%
non-condensing
Physical
Dimensions
6.1” x 4.3” x
0.9” (155 mm x 110
mm x 23 mm), not
including mount foot
or mount plate
Weight: 14.4 oz (409
g)
Antenna
Integrated omni-directional
antennas (3.7 dBi
gain at 2.4 GHz, 4.8
dBi gain at 5 GHz)
Interfaces
1 × 10/100/1000
BASE-T Ethernet
(RJ45) input 1 ×
Gigabit Ethernet
(RJ45) with 802.3af
Power over Ethernet
output 3 × Gigabit
Ethernet (RJ45) out
Security
Integrated layer
7 firewall with
mobile device policy
management Real-time
WIDS/WIPS with
alerting and
automatic rogue AP
containment with Air
Marshal Flexible
guest access with
device isolation
VLAN tagging
(802.1Q) and
tunneling with IPSec
VPN PCI compliance
reporting WEP, WPA,
WPA2-PSK,
WPA2-Enterprise with
802.1X EAP-TLS,
EAP-TTLS,
EAP-MSCHAPv2,
EAP-SIM TKIP and AES
encryption
Enterprise Mobility
Management (EMM) &
Mobile Device
Management (MDM)
integration
Quality
of Service
Advanced Power
Save (U-APSD) WMM
Access Categories
with DSCP and 802.1p
support Layer 7
application traffic
identification and
shaping
Mobility
PMK, OKC, and
802.11r for fast
Layer 2 roaming
Distributed or
centralized layer 3
roaming
LED
Indicators
4x 2 Ethernet
status for Ethernet
ports 1
power/booting/firmware
upgrade status
Warranty
Lifetime hardware
warranty with
advanced replacement
included
Ordering
Information
MR30H-HW
MR30H-HW:
Meraki MR30H Cloud
Managed 802.11ac AP
MA-INJ-4-XX
Cisco Meraki 802.3at
Power over Ethernet
Injector (XX = US,
EU, UK or AU)
Note: Meraki
Enterprise license
required
Contact Us for a Quotation
|