Tuesday, June 28, 2022
 












  • Wi-Fi Installation

    Mondrian Cityplace

    24/7 Internet Access for the Public Areas

    Visit the Showcase

  • Wi-Fi Installation

    Mondrian Cityplace Club Room

    Visit the Showcase

  • Wi-Fi Installation

    Mondrian Cityplace "Zen Garden"

    Visit the Showcase

  • Wi-Fi Installation

    Mondrian Cityplace Pool

    Visit the Showcase

  • Wi-Fi Installation

    Trianon Pool

    802.11 Internet Access

    Visit the Showcase

  • Wi-Fi Installation

    Trianon Pool

    Visit the Showcase

  • Wi-Fi Installation

    Trianon Pool

    Internet Connection 24/7

    Visit the Showcase

  • Wi-Fi Installation

    Trianon "Cyber Cafe"

    Visit the Showcase

  • Wi-Fi Installation

    Trianon Courtyard

    Visit the Showcase

  • Wi-Fi Installation

    Fairfield Inn & Suites Dallas North

    Meraki 802.11n Wireless Access Points

    Visit the Showcase

  • Wi-Fi Installation

    Fairfield Inn & Suites Dallas North

    Breakfast Room - 802.11n Dual-Radio, Dualband, Access Point

    Visit the Showcase

  • Wi-Fi Installation

    Fairfield Inn & Suites Dallas North

    Lobby - 802.11n Dual-Radio, Dualband, Access Point

    Visit the Showcase

  • Wi-Fi Installation

    Fairfield Inn & Suites Dallas North

    1st Floor Coverage Prediction

    Visit the Showcase

  • Wi-Fi Installation

    Pavestone Company

    802.11 Wireless Bridges

    Visit the Showcase

  • Wi-Fi Installation

    Pavestone Main Building

    802.11a Root Bridges

    Visit the Showcase

  • Wi-Fi Installation

    Pavestone Plant 1

    802.11a Bridge

    Visit the Showcase

  • Wi-Fi Installation

    Pavestone Block Building

    Power Injector (typical)

    Visit the Showcase

  • Wi-Fi Installation

    Pavestone Machine Shop

    802.11a Bridge

    Visit the Showcase

  • Wi-Fi Installation

    Pavestone Bagging Plant

    802.11a Bridge

    Visit the Showcase

  • Wi-Fi Installation

    Pavestone Block Plant

    802.11a Bridge

    Visit the Showcase

  • Wi-Fi Installation

    Pavestone Bagging Plant

    Legacy Bridge Removal

    Visit the Showcase

  • Wi-Fi Installation - Airport Bridges

    Airport Bridges Layout

    Two Wireless Bridges Installed

    Visit the Showcase

  • Wi-Fi Installation - Airport Bridges

    Main Building Installation

    802.11 Root Bridge for the Hanger Expansion

    Visit the Showcase

  • Wi-Fi Installation - Airport Bridges

    Hanger Expansion

    Clear Line of Sight from the Main Building to the New Hanger Space

    Visit the Showcase

  • Wi-Fi Installation - Airport Bridges

    Hanger Bridge Installation

    802.11 Outdoor Bridge with Integrated Antenna

    Visit the Showcase

  • Wi-Fi Installation - Airport Bridges

    Dual Bridge Installation on Engineering Building

    One of Two 802.11 Non-Root Bridges

    Visit the Showcase

  • Wi-Fi Installation - Airport Bridges

    Installation Complete!

    802.11 Non-Root Bridge

    Visit the Showcase

    
 
 Meraki Solutions

Cloud Networking Architecture

Wireless
   - MR30H
   - MR33
   - MR42
   - MR52
   - MR53
   - MR74
   - MR84
   - Z1

Security

Switching

Communications

Security Cameras

 
    802.3at POE Injectors
 

802.3at PoE Injector

The Cisco Meraki PoE Injector allows delivery of both data and power to a Meraki access point over a single Ethernet cable, allowing deployment of devices exactly where they are needed to provide the best wireless coverage and at much lower installation cost. This PoE injector is specifically designed to meet the power needs of Cisco Meraki 802.3at-compatible devices. Check the access point specifications to ensure compatibility.

Easy Installation
Use Power Over Ethernet to supply power (and optionally data) to Cisco Meraki 802.3at compatible devices. Ethernet cable is inexpensive and easy to install. Simply plug the AC adapter into the side of the Cisco Meraki PoE injector, then plug Ethernet cable into the PoE port and route that cable to your 802.3at-compatible device. To add a wired data connection, plug the data Ethernet cable into the LAN port on the Meraki PoE Injector.

Power

  • Input Voltage: 100 to 240 VAC
  • Input Current: 0.8A maximum
  • AC Input Frequency: 50-60 Hz
  • Maximum Output Power: 30 W
  • Powered device can be up to 100m away from power injector

Data

  • Compatible with 10/100/1000 Mbit/s Ethernet, full duplex

Environmental

  • Operating Temperature: (32 to 104°F (0 to 40°C))
  • Storage Temperature: (-4 to 158°F
    (-20 to 70°C))
  • Operating Humidity: 5 to 93%

Additional Features

  • Short-circuit protection

Physical Dimensions

  • 6.3” x 2.1” x 1.4” (160 mm x 52.5 mm x 35.5 mm)
  • Weight: 0.46 lb (210 g)
 

Mounting

  • Mounts to walls (anchors and screws not included)

Compatibility

  • Complies with 802.3at standard
  • Backward compatibility with 802.3af MR-series access points

LED Indicators

  • Input Power
  • Fault
  • Detected/connected to valid 802.3at load

Regulatory

  • USA: FCC Part 15 Class B
  • EU: EN55022 Class B

Warranty

  • 1 year hardware warranty included

Ordering Information

  • MA-INJ-4-US
    802.3at Power over Ethernet Injector (US plug)

Multigigabit 802.3at PoE Injector

Multigigabit 802.3at PoE InjectorThe Cisco Meraki Multigigabit PoE Injector allows delivery of both data and power to a Meraki access point over a single Ethernet cable, allowing deployment of devices exactly where they are needed to provide the best wireless coverage and at much lower installation cost. This PoE injector is specifically designed to meet the power needs of Cisco Meraki 802.3at-compatible multigigabit devices. Check the access point specifications to ensure compatibility.

Easy Installation
Use Power Over Ethernet to supply power (and optionally data) to Cisco Meraki 802.3at compatible devices. Ethernet cable is inexpensive and easy to install. Simply plug the AC adapter into the side of the Cisco Meraki PoE injector, then plug ethernet cable into the PoE port and route that cable to your 802.3at-compatible device. To add a wired data connection, plug the data ethernet cable into the LAN port on the Meraki PoE Injector.

Power

  • Input Voltage: 100 to 240 VAC
  • Input Current: 1.5A maximum
  • AC Input Frequency: 50-60 Hz
  • Maximum Output Power: 30 W
  • Powered device can be up to 100m away from power injector

Data

  • Compatible with 10/100/1000Mbps Ethernet and multigigabit ethernet up to 10Gbps, full duplex

Environmental

  • Operating Temperature: 14 to 113°F
    (-10 to 45°C)
  • Storage Temperature: -40 to 158°F
    (-40 to 70°C)
  • Operating Humidity: 5 to 90%

Additional Features

  • Short-circuit protection

 

 

Physical Dimensions

  • 6.5” x 3.5” x 1.7” (166 mm x 87.9 mm x 43 mm)
  • Weight: 0.91 lb (410 g)

Mounting

  • Mounts to walls (anchors and screws not included)

Compatibility

  • Complies with 802.3at standard
  • Backward compatibility with 802.3af MR-series access points

LED Indicators

  • Input Power
  • Fault
  • Detect/connected to valid 802.3at load

Ordering Information

  • MA-INJ-5-US
    Meraki Multigigabit 802.3at Power over Ethernet Injector (US plug)
 
Copyright 2019 by Onre' Productions      Terms of Use     Privacy Statement